Smoking accessories 6 min read

Using a precision scale properly: accuracy, calibration, tare

0.01 g readability does not mean 0.01 g accuracy: how to choose the right capacity, calibrate with the correct weight, avoid measuring errors caused by the surface, draughts, mobile phones and batteries, and use the tare function.

The figure on the packaging, such as 0.01 g, is the readability: the smallest step the display shows. How accurately the scale actually measures is a different question; for a typical pocket scale with a 100 g capacity and 0.01 g increments, one manufacturer, for example, states a permissible deviation of ±0.02 g with the calibration weight. To get correct readings, place the scale on a firm, level surface away from draughts, let it warm up for 30 to 60 seconds and calibrate it from time to time with exactly the calibration weight stated in the instructions. For bowls and containers, use the tare button, which sets the empty weight to zero.

What is the difference between readability and accuracy?

The readability, also called the increment or resolution, only tells you in which steps the display moves. A scale with 0.01 g readability therefore shows 12.34 g, while one with 0.1 g shows only 12.3 g. Whether this reading is also correct is described by the accuracy or tolerance. On pocket scales it is usually coarser than the readability. The manufacturer American Weigh Scales states a permissible deviation of ±0.02 g for its 100 g pocket scale and ±0.2 g for the 500 g model. The last digit on the display is therefore more of a guide value than a measurement.

Two terms are often confused here: calibration only checks and records how far the reading deviates from the true value. Adjustment sets the scale so that the deviation is as small as possible. Strictly speaking, the scale’s “CAL” mode is an adjustment. Official verification is only required for commercial use, for example when goods are sold by weight; it is not necessary for private use.

Which capacity is right for me?

The capacity is the maximum load the scale can display. On pocket scales, the larger it is, the coarser the increment usually is. Choose the scale so that your usual items, including the bowl, stay well below the maximum load.

Model from the shopCapacityReadabilityWeighing surfaceFunctions according to the manufacturerBatteries
Black Leaf digital scale orange100 g0.01 g76 x 59 mmtare, calibration, overload warning, switch-off after 60, 120 or 180 s2 x AAA
ProScale LCS100100 g0.01 gstainless steel with VibraKilltare, calibration, memory, auto-off2 x AAA
ProScale 111-C Snake Eyes111 g0.01 gapprox. 51 x 51 mmtare, calibration, removable cover2 x CR2032
Black Leaf Touch200 g0.01 gstainless steel, lid as an additional surfacetare, touchscreen2 x AAA
ProScale LCS-500500 g0.1 g68 x 47 mmtare, calibration, overload and battery indicator2 x AAA
Black Leaf with silicone bowl500 g0.1 gwith silicone bowltare, overload protection, automatic switch-off2 x AAA

As a rough guide: for small items in the range of a few grams, a scale with 0.01 g increments makes sense; for bowls, jars and heavier items, a 500 g scale with 0.1 g increments.

How do I calibrate a precision scale properly?

Most pocket scales are adjusted at the factory. Transport, sharp changes in temperature and even a change of location can shift the reading, because gravity varies slightly from place to place. According to American Weigh Scales, you should therefore calibrate when the scale is new, has been moved or shows incorrect readings. Other guides recommend calibrating before every use; for everyday purposes it is usually enough to check the reading regularly with the weight.

  1. Warm up: place the scale on a firm, level surface, switch it on and wait 30 to 60 seconds.
  2. Clear the surface: nothing may lie on the weighing surface, not even the lid.
  3. Start calibration mode: the button combination is given in the instructions; depending on the model, you hold down MODE, ON/OFF or CAL for a few seconds. The display shows “CAL” and the required weight.
  4. Place the weight: put exactly this weight in the centre, do not drop it.
  5. Wait for confirmation: the scale shows, for example, “PASS” or returns to weighing mode.
  6. Double-check: remove the weight, zero the scale, place the weight again. The reading should be within the tolerance.

Only use the weight stated in the instructions. A wrong value throws the scale off instead of correcting it. Calibration weights come in accuracy classes from E1 (very accurate) to M3; for pocket scales, American Weigh Scales recommends class M2. We do not currently stock individual calibration weights in the online shop, so ask for them in the shop.

What distorts the measurement: surface, draughts, mobile phone, batteries?

  • Surface: only weigh on a firm, level surface. A tablecloth, a sofa cushion or a sloping surface distorts the value. According to the manufacturer, a corner of the room or a heavy table is the most stable.
  • Vibrations: a wobbly table or running appliances make the reading jump. According to the manufacturer, ProScale models with VibraKill dampen this, but they are no substitute for a quiet spot.
  • Draughts: a fan, a radiator or an open window moves the weighing surface. The finer the increment, the more sensitively the scale reacts. Using the lid as a draught shield helps.
  • Mobile phones and radio signals: devices that emit radio waves can make the reading fluctuate. American Weigh Scales explicitly mentions radio devices such as cordless phones. Put your phone a little way off while weighing.
  • Temperature: avoid extreme heat or cold, and recalibrate after sharp changes in temperature.
  • Batteries: according to the manufacturer, weak batteries are a common cause of incorrect readings. If you have problems, fit new batteries first and make sure the polarity is correct.

How do I use the tare function?

With tare, you subtract the weight of a container so that only the contents are shown.

  1. Switch on the scale and wait until it shows 0.00 g.
  2. Place the empty bowl or container on the scale.
  3. Briefly press the tare button; the reading jumps to zero.
  4. Add the contents and wait until the value is stable. The net weight is shown.
  5. For the gross value, remove everything and press tare again.

Important: the container weight still counts towards the maximum load. A 100 g scale with a 40 g bowl can only measure 60 g of contents. If you remove the container after taring, the display shows a negative value; that is normal.

How do I look after my precision scale?

Store the scale dry, clean and with the lid closed; according to the manufacturer, dust and moisture damage the sensor and electronics. Wipe the stainless steel surface with a slightly damp, lint-free cloth without letting liquid run into the housing. According to the manufacturer, the silicone bowl of the Black Leaf scale can go in the dishwasher, but the scale itself cannot. Do not drop the scale and do not overload it: overload protection only helps to a limited extent, and an overload can permanently damage the load cell. If you are not going to use the scale for a while, take the batteries out.

Common mistakes: what often goes wrong with precision scales?

  • Confusing readability with accuracy: 0.01 g increments do not mean that every hundredth is correct.
  • Weighing on a soft or sloping surface: the values drift or do not settle.
  • Calibrating with the wrong weight: coins or a weight other than the one stated throw the scale off.
  • Calibrating before the scale has warmed up: only calibrate 30 to 60 seconds after switching on.
  • Ignoring weak batteries: if the reading jumps or is suddenly wrong, replace the batteries first.
  • Exceeding the maximum load with the bowl: tare only subtracts the container weight arithmetically; the scale still bears the load.

In our shop at Lorenzstraße 9 in Hof, you can try out our Black Leaf and ProScale scales side by side and compare how they react to the same weight. You will find all models online under Precision scales. If you want to track the weight loss during drying, you will find suitable tips in the guide Drying properly.

Featured in this guide

Frequently asked questions

Why does my scale show something different every time I weigh?

It is usually down to the location: a soft surface, draughts or vibrations make the last digit jump. Radio devices nearby and weak batteries are also common causes. Place the scale on a firm surface, put your phone aside and fit new batteries if necessary.

Can I calibrate a precision scale with coins?

Better not. Coins have manufacturing tolerances and wear down, so their weight is only approximately known. To calibrate, you need exactly the test weight stated in the instructions, ideally in a recognised accuracy class.

How often should I calibrate my scale?

Opinions differ: some guides recommend it before every use, while the manufacturer American Weigh Scales recommends it when the scale is new, has been transported, has been exposed to sharply changing temperatures or shows incorrect readings. In practice, it makes sense to check the reading regularly with the calibration weight and only recalibrate if there is a deviation.

Is a scale with a 500 g capacity less accurate than one with 100 g?

With pocket scales, usually yes, because the increment is coarser: 500 g models generally show 0.1 g, 100 g models 0.01 g. The tolerance grows too, with one manufacturer stating ±0.2 g for 500 g and ±0.02 g for 100 g. For heavy bowls and jars, the larger scale is still the right choice.

Which batteries do the scales need?

Most pocket scales in the shop run on two AAA batteries; the ProScale 111-C uses two CR2032 button cells. According to the product information, the batteries are included with all models. If the reading becomes unsteady or inaccurate, changing the batteries is the first step.

Sources

All information to the best of our knowledge and based on manufacturer data as of the date shown. It does not replace the manufacturer’s instructions. This guide was created with AI assistance and reviewed by our team.

More from Smoking accessories